Thursday, October 20, 2011

J-44015 through J-48870 GM Dealer Tools

J-44015 through  J-48870

 

J-44015 STEERING LINKAGE INSTALLER
J-44089 MASTER CYLINDER BLEEDER ADAPTER New 2000 and newer H-Cars.
J-44152 Jumper Harness (20 pins)
J-44212 CAMSHAFT HOLDING TOOL -PAIR Northstar, 4.0L
J-44214 FLYWHEEL HOLDING TOOL
J-44215 REAR MAIN SEAL INSTALLER IN-LINE 4 & 5 cyl Atlas ENGINE found in Colorado + Canyon Trucks
J-44217 Timing Chain Retension Tool In-line 6 cyl Atlas Engine :Bravada, Envoy, Trailblazer, Ranier
J-44217-45 CHAIN RETENTION TOOL IN-LINE 4 & 5 cyl Atlas ENGINE found in Colorado + Canyon Trucks
J-44218 FRONT CRANKSHAFT SEAL INSTALLER In-line 6 cyl Atlas Engine :Bravada, Envoy, Trailblazer, Ranier
J-44220-UPD Engine Lift Bracket Update IN-LINE 4 & 5 cyl Atlas ENGINE found in Colorado + Canyon Trucks
J-44222 Camshaft Sprocket Holding Tool In-line 6 cyl Atlas Engine :Bravada, Envoy, Trailblazer, Ranier
J-44228-3 Valve Spring Compressor Adapter 2006 + newer S/T SUV, 2007 + newer S/T pick-up, H3 with 2.8L I4, 3.5L I5, and 4.2L I6 J-44229 In line 6 cyl (Atlas) engine tool kit In-line 6 cyl Atlas Engine :Bravada, Envoy, Trailblazer, Ranier
J-44246 SOLENOID TESTING KIT 1993 CAR/1994 TRUCKS THROUGH PRESENT
J-44284-2 FUEL TANK SIPHONING HOSE
J-44295
J-44339 REVERSE SYNCHRONIZER INSTALLER 1996-2003 S/T Truck w/NVG 1500
J-44340 BEARING INSTALLER 1996-2003 S/T Truck w/NVG 1500
J-44363 SUNROOF ALIGNMENT PIN Used
J-44363 SUNROOF ALIGNMENT PIN New
J-44363 SUNROOF ALIGNMENT PIN Used
J-44370-3 J-44375 Assembly Pallet F-23 Manual Transmission
J-44376 BEARING PUSHER / PULLER F23 5 Speed J/N Cars.
J-44376 BEARING PUSHER / PULLER F23 5 Speed J/N Cars.
J-44376-1 BEARING PUSHER / PULLER F23 5 Speed J/N Cars.
J-44377 INPUT SHAFT ANTI-ROTATION TOOL F23 5 Speed J/N Cars.
J-44378 PRESS ADAPTER F23 5 Speed J/N Cars.
J-44379 DIFFERENTIAL BEARING PULLER PLATE F23 5 Speed J/N Cars.
J-44380 DIFFERENTIAL BEARING RACE PULLER F23 5 Speed J/N Cars.
J-44381 SHIFTER BEARING REMOVER F23 5 Speed J/N Cars.
J-44382 COUNTERSHAFT BEARING PULLER F23 5 Speed J/N Cars.
J-44383 COUNTERSHAFT BEARING INSTALLER F23 5 Speed J/N Cars.
J-44384 Shift Shaft Seal Installer 2010 Camaro with Tremac Trans; install the shift shaft seal into the trans extension housing.
J-44385 Camshaft TDC Position Guide Pin
J-44386 INPUT OUTPUT BREARING INSTALLER F23 5 Speed J/N Cars. 
J-44387 OUTPUT BRG SLEEVE INSTALLER & PIN F23 5 Speed J/N Cars.
J-44387-1 OUTPUT BRG SLEEVE INSTALLER & PIN F23 5 Speed J/N Cars.
J-44388 FINAL DRIVE END CHECKING FIXTURE F23 5 Speed J/N Cars. 
J-44389 COUNTERSHAFT BEARING INSTALLER F23 5 Speed J/N Cars.
J-44394 AXLE SEAL PROTECTOR
J-44395 TRANSMISSION HOLDING FIXTURE 97-later T56 Manual trans
J-44412 Pinion Bering Installer
J-44414 Pinion Oil Seal Installer
J-44416 Pinion Setting Tool
J-44417 Rear Pinion Bearing Installer
J-44419 Hub Bearing Installer
J-44420 Differential Bearing Installer
J-44427 SPANNER WRENCH S/T Truck (98 & Later) The left side adjuster nut on the 7.25" front axle is different from the nut on the right side. Current tool

J-33792 will work on the right side, but will not engage onto the nut on the left side.
J-44465 TRANS HOLDING FIXTURE ADAPTER Used 4T65-e

J-44465 TRANS HOLDING FIXTURE ADAPTER New 4T65-e
J-44466-13 FUEL LINE SHUTOFF ADAPTERS 92-95 M/L van, S/T truck, C/K truck and G van fuel systems (CPI) and 1996 to present M/L, C/K, and G fuel systems with (SCPI)
J-44467 OUTPUT SHAFT PULLER 4T65-e  

J-44467 is a heavy-duty version of previously essential
J-38868-A Output Shaft Puller
J-44470 F23 manual trans tool kit F23 5 Speed J/N Cars.
J-44472 END PLAY CHECKER 4T65-e
J-44472-1 END PLAY CHECKER 4T65-e
J-44485 BRAKE BOOSTER ROD ADJUSTER
J-44538 TORX 30 PLUS SOCKET 4T65-e
J-44539 TRANSAXLE TEST HARNESS 1997-present 4L30E
J-44540 BEARING / TONE RING INSTALLER 2000-later K-Truck w/NV149 t/case (Tahoe, Yukon, Denali, Escalade)
J-44540-2 BEARING / TONE RING INSTALLER 2000-later K-Truck w/NV149 t/case (Tahoe, Yukon, Denali, Escalade)
J-44551 A/C SUCTION SCREEN INSTLR KIT Universal

J-44570 REAR AXLE BUSHING REPLACER 2005 Chevrolet Cobalt, Pontiac Wave, G5, HHR ;rear suspension control arm bushing
J-44570-1 REAR AXLE BUSHING REPLACER 2005 Chevrolet Cobalt, Pontiac Wave, G5, HHR ;rear suspension control arm bushing
J-44570-2 REAR AXLE BUSHING REPLACER 2005 Chevrolet Cobalt, Pontiac Wave, G5, HHR ;rear suspension control arm bushing
J-44570-3 REAR AXLE BUSHING REPLACER 2005 Chevrolet Cobalt, Pontiac Wave, G5, HHR ;rear suspension control arm bushing
J-44570-4 REAR AXLE BUSHING REPLACER 2005 Chevrolet Cobalt, Pontiac Wave, G5, HHR ;rear suspension control arm bushing
J-44586 P/S SEAL REMOVER / INSTALLER 2002 - 2009 GMT360 (S/T Utility) (Bravada, Envoy, Trailblazer).
J-44602 Injector Test Adapter 2000 + newer 4.0 & 4.6L PREMIUM V-8 & 5.3L (L59) E85 compatible engine 
J-44626  O2 SOCKET  22 MM
J-44636 FT.OUTPUT SHAFT PROT./INST 1998-C NVG T/Case
J-44636-2 Inside of Seal Installer Protector
J-44638-1
J-44639 Injector Remover Duramax
J-44640 Valve Stem Seal Installer Duramax
J-44641 Rear Crankshaft Seal Remover Duramax
J-44642 Rear Crankshaft Seal Installer Duramax
J-44663 Flywheel Holding Tool Duramax
J-44643 Flywheel Holding Tool Duramax
J-44644 Ft. Crankshaft Seal Remover Duramax
J-44645 Ft. Crankshaft Seal Installer Duramax
J-44646 Valve Spring Compressor -On Car Duramax
J-44663 BALL JOINT REMOVER Quadrasteer
J-44664 CROWSFOOT WRENCH 33mm Quadrasteer
J-44665 TIE ROD REMOVAL Set/Kit Quadrasteer
J-44665-2 TIE ROD REMOVAL Set/Kit Quadrasteer
J-44685 Rear Axle Seal and Bearing Remover 1999-LATER SILVERADO/SIERA C/K GMT800, 2000-LATER TAHOE, ESCALADE, YUKON, YUKON XL, DENALI, SUBURBAN WITH 8.6" RING GEAR REAR AXLE.
J-44714 BEARING REMOVER
J-44714-1 BEARING REMOVER
J-44714-1B BEARING REMOVER
J-44714-2 BEARING installer ASSEMBLY
J-44714-3 BEARING installer ASSEMBLY
J-44721-20 P/S PRESSURE TESTER ADAPTERS 1999-2002 Chevrolet Tracker
J-44723 Allison Transmission Adapter Plate mounts to an engine stand with a 1000lb. capacity or greater
J-44731 Input Shaft Seal Installer 2010 Camaro with Aisin or Tremec Transmission
J-44732 OUTPUT SHAFT SEAL INSTALLER 2001-Later C-truck with ZF 6-Speed manual transmission (2 -wheel drive only)
J-44735 input shaft front bearing installation tool 2010 Camaro with Tremec Transmission
J-44747 input shaft front bearing installation tool 2010 Camaro with Tremec Transmission
J-44748 input shaft oil seal Remover 2001-Later C/K truck with ZF 6 - Speed manual
J-44752 BEARING RACE / SEAL INSTALLER 2001 + up Aztek (P,Canada), 2002 and up U-Van AWD (C,O,P), 2003 and up Rendezvous(B)
J-44755 ASSEMBLY HOLDING FIXTURE, PTU (Power Transfer Unit) 2001 + up Aztek (P,Canada), 2002 and up U-Van AWD (C,O,P), 2003 and up Rendezvous(B)
J-44757 TRANSFER CASE SHIM SELECTOR 2001 + up Aztek (P,Canada), 2002 and up U-Van AWD (C,O,P), 2003 and up Rendezvous(B)
J-44766 torque converter seal  INSTALLER 5L40 trans
J-44767 manual shift shaft seal installer
J-44809 RDM OUTPUT SHAFT SEAL INSTALLER 2001 Aztek (P,Canada), 2002 U-Van AWD (C,O,P), 2003 Rendezvous(B)
J-44847
J-44851 Pinion Seal Installer Equinox + Torrent
J-44852 Front Clutch Pack Seal Installer Equinox + Torrent
J-44853 Rear Clutch Pack Seal Installer Equinox + Torrent
J-44866 Support Bushing Remover & Installer Vue, Equinox, Torrent
J-44866-1 Support Bushing Remover & Installer Vue, Equinox, Torrent
J-44866-2 Bushing Installer Receiver Equinox, Torrent
J-44866-2A Bushing Installer Receiver Vue, Equinox, Torrent
J-44870 Driveshaft Carrier Bearing Installer Equinox + Torrent
J-44872 Pinion Shaft Seal Installer Equinox + Torrent
J-44873-2 Pinion Flange Holder /Remover Bolts Equinox + Torrent
J-44882 Pinion Remover Equinox + Torrent
J-44887 OIL FILTER CAP REMOVAL TOOL 2000 - CURRENT L850 ENG
J-44894-A Brake Pressure Bleeder Adapter Delphi + Bosch brakes
J-44900 8.1L Engine Tool Set
J-44915 REAR DIFFERENTIAL PINION SEAL INST 2001 Aztek (P,CN), 2002 U-Van AWD (C,O,P), 2003 Rendezvous(B)
J-45004-1 FUEL SIPHON HOSE 2001 + up U / V-van; 2003 + up GMT370
J-45005 PINION SEAL INSTALLER Cadillac CTS
J-45007 Bushing Remover & Installer New 2003 GMX320 Catera, 2004 GMT265 LAV, 2005 GMX295 Seville
J-45012 PINION FLANGE HOLDER  '03 up CTS
J-45017 OUTER SHAFT SEAL INSTALLER 2003 - 09 Cadillac CTS
J-45019 Flange Remover 2010 Camaro with Aisin MV5 Trans
J-45019-3 Rear Differential Bolts GTO
J-45025 BELT TENSIONER WRENCH 2002 L61 (L850) Engine in J&N Car
J-45027 Tensioner Tool 2.2L L61 (L850) Engine; 3.6L, 3.9L High Feature Engines J-45027-1 Tensioner Tool 2.2L L61 (L850) Engine; 3.6L, 3.9L High Feature Engines
J-45053-3 Pump Removal Tool 4L60e
J-45056 Trans Oil Pres. Gauge Adapter 2ML70 2-mode hybrid automatic transmission
J-45057 ENGINE SUPPORT ADAPTER Aztec and Rendezvoux with RPO "LA1" 3.4L engine 2002-2005
J-45087 BEARING INSTALLER 6T70 - muti-purpose tool for the 6T70 transaxle
J-45094 BEARING RACE REMOVER used with the
J-45124 Puller Bridge to remover both transfer axis bearing cups without damage
J-45096-23 Trans flo adapter GMT800 with Allison transmission
J-45096-24
J-45096-30 Cooler Line Flush Adapters AF40-6 Transmission 2010 Buick LaCrosse, 2010 Chevrolet Equinox
J-45096-50 Trans Cooler Flush Adapter 2010 Cadillac SRX
J-45101-100 Conical BRAKE ROTOR RUNOUT WASHERS
J-45103-1 AXLE SHAFT REMOVER ADAPTERS 2001 and Newer TRACKER
J-45104 Axle Remover Adapter NVG 126/266 Manual Transmission
J-45105 Ball Joint Replacer New 2001 + newer GMT360 (Bravada, Envoy, Trailblazer).
J-45108 Plate, Gauge 1996 + newer 9.5" ring gear axles
J-45117 Ball Joint Installation Spacer 2001 GMT360 (Bravada, Envoy, Trailblazer)
J-45124 Puller Bridge Camaro + Corvette with TR6060 Tremac Trans
J-45124-1 Puller Bridge Camaro + Corvette with TR6060 Tremac Trans
J-45124-9 Puller Bridge legs Camaro + Corvette with TR6060 Tremac Trans
J-45126 Snap Ring Pliers 5L50E, 6L50, 6L80, 6L90 transmission
J-45177 Outer Seal Installer
J-45184 Differential Bearing Race Installer
J-45187 Differential Output Shaft Oil Seal Installer Equinox, Torrent
J-45201 Cooler Line Seal Remover AF40-6 Transaxle and others
J-45201-2 Cooler Line Seal Remover AF40-6 Transaxle and others
J-45201-1 Cooler Line Seal Remover
J-45201-3 Cooler Line Seal Remover
J-45215 SEAT BELT LATCH FORMING TOOL
J-45222 Axle Housing Spreader 2002 + up GMT360 (Trailblazer, Envoy, Bravada) with 8.0" rear axle
J-45222-10 Axle Housing Spreader Adapters COLORADO/CANYON
J-45224 Axle Bearing Adjuster (Right side) Used 2002 and up GMT360 (Trailblazer, Envoy, Bravada) with 7.25” front axle.
J-45224 Axle Bearing Adjuster (Right side) New 2002 and up GMT360 (Trailblazer, Envoy, Bravada) with 7.25” front axle.
J-45225 Axle Seal Installer 2002 and up GMT360 (Trailblazer, Envoy, Bravada) with 7.25” Front Axle
J-45228 Pinion Bearing Cup Replacer 2002 + up GMT360 (Trailblazer, Envoy, Bravada) with 7.25" axle.
J-45228-2 Pinion Bearing Cup Replacer 2002 + up GMT360 (Trailblazer, Envoy, Bravada) with 7.25" axle.
J-45228-4 Pinion Bearing Cup Replacer 2002 + up GMT360 (Trailblazer, Envoy, Bravada) with 7.25" axle.
J-45230 Gauge Block 2002 + newer GMT360 (Trailblazer, Envoy, Bravada) with 8.0" rear axle.
J-45231 Side Bearing Installer 2002 and up GMT360 (Trailblazer, Envoy, Bravada) with 8.0" rear axle
J-45232 Adjuster Bearing Replacer (Left Side) GMT360 (Trailblazer, Envoy, Bravada) with 7.25” axle.
J-45233 Differential Bearing Adjuster Needle Bearing Replacer - RH Magana 8.25 axle
J-45233-1 Differential Bearing Adjuster Needle Bearing Replacer - RH Magana 8.25 axle
J-45234 Pinion Bearing Remover 2002 + up GMT360 (Trailblazer, Envoy, Bravada) with 7.25" axle. J-45234-1 Pinion Bearing Remover 2002 + up GMT360 (Trailblazer, Envoy, Bravada) with 7.25" axle.
J-45235 TONE RING INSTALLER NVG 126/266 Manual Transmission
J-45235-1 TONE RING INSTALLER NVG 126/266 Manual Transmission
J-45235-2 TONE RING INSTALLER NVG 126/266 Manual Transmission
J-45236 Output Shaft Seal Installer - Front NVG 126/266 Manual Transmission used in 2002 GMT360 (Trailblazer, Envoy, Bravada), GMT370, GMT305, and GMT368
J-45236-1 Output Shaft Seal Installer - Front NVG 126/266 Manual Transmission used in 2002 GMT360 (Trailblazer, Envoy, Bravada), GMT370, GMT305, and GMT368
J-45237 INPUT GEAR THRUST BRG INSTALLER NVG 126/266 Manual Transmission used in 2002 GMT360 (Trailblazer, Envoy, Bravada), GMT370, GMT305, and GMT368
J-45238 INPUT GEAR THRUST BRG INSTALLER
J-45239 SECTOR SHAFT NEEDLE BRG INSTALLER NVG 126/266 Manual Transmission
J-45243-1
J-45263-1
J-45265 Rear Knuckle bushing Installer EQUINOX, Torrent
J-45265-1 Rear Knuckle bushing Installer
J-45268-113 TXV Adapter (DTS) for Cadillac
J-45268-117 TXV Adapter (A/C flush) Equinox + Torrent
J-45268-121 TXV Flush Adapter Yukon Tahoe Escalade
J-45270 WHEEL STUD REMOVER 2003 GMT560 Family II & III (C-Series).
J-45277 INPUT SHAFT SEAL INSTALLER GMT560 (C-Series)
J-45341 Axle Shaft Remover 2003 + up Vibe (GMX 125)
J-45342-1 Axle Deflector Installer Equinox + Torrent  (2 pieces)
J-45342-2 Axle Deflector Installer Equinox + Torrent  (2 pieces)
J-45358 TRANSFER CASE HOUSING SEPARATOR New NVG 126/266 found in 2002 + newer S/T Utilities (Trailblazer, Envoy, Bravada). 
J-45358 TRANSFER CASE HOUSING SEPARATOR Used NVG 126/266 found in 2002 + newer S/T Utilities (Trailblazer, Envoy, Bravada). 
J-45359 Axle Seal Installer 2002 GMT360 (Trailblazer, Envoy, Bravada), GMT370, GMT305, and GMT355
J-45379 OUTPUT SHAFT SEAL INSTALLER 2001-Current S-Truck w/NV1500 or NV3500
J-45380 Bushing Remover & Installer  2001-up K & T Truck, L-Van with NVG transfer cases with 2-piece housings
J-45381 OUTPUT SHAFT SEAL INSTALLER 1992 and newer NV4500
J-45382 Transfer Case Torque Check Adapter New 1999 - Later K-Series, 2003 GMT610 Van
J-45398 FORWARD CLUTCH INNER SEAL REMOVER 4T40-e + 4T45-e
J-45398-2 FORWARD CLUTCH INNER SEAL REMOVER 4T40-e + 4T45-e
J-45399 BRAKE BOOSTER VCUUM GAUGE
J-45399 is an adapter that allows
J-44638 Vacuum/Pressure Gauge to be attached to the brake booster.
J-45404 Transmission Indicator Alignment Tool EQUINOX, Torrent
J-45507 CALIPER BOOT SEAL INSTALLER 2003 + up Cadillac CTS
J-45508
J-45515 BRAKE CALIPER PISTON SEAL INSTALLER 2000-later GMT800 2500, K55 Limo
J-45531 CV Stub Shaft Remover 1999-Up Tracker 4WD
J-45545 Puller Adapter - Transfer Case 2006 Trailblazer SS only 
J-45548 BUSHING/BEARING REMOVER 2000-2003 K-truck w/NV149 t/case and 2004 H2 with BW 4484.
J-45549 MAINSHAFT SUPPORT BEARING 2000-2003 K-truck W/NV149 t/case.
J-45625
J-45703 Inner Bearing Race Remover
J-45704 Inner Bearing Race Installer
J-45705 Outer Pinion Bearing Race Remover
J-45706 Pinion Race Remover 2003 GMT610 G/H Van
J-45706 Pinion Race Remover 2003 GMT610 G/H Van
J-45709 LIMITED SLIP DIFFERENTIAL KIT Dana 80 axles.
J-45710 Pinion Seal Installer
J-45711 Side Bearing Remover
J-45713 DANA 60 & 70 tool kit DANA 60 & 70
J-45714 DANA 60 & 70 tool kit DANA 60 & 70
J-45722 FUEL SENDING UNIT WRENCH required to install and remove a "global" 130mm SAE standard fuel tank lock ring
J-45725-1 CRADLE BUSHING REPLACER G6, Lucerne, DTS
J-45725-1A CRADLE BUSHING REPLACER G6, Lucerne, DTS
J-45725-2 CRADLE BUSHING REPLACER G6, Lucerne, DTS
J-45725-2A CRADLE BUSHING REPLACER G6, Lucerne, DTS
J-45725-3 CRADLE BUSHING REPLACER G6, Lucerne, DTS
J-45725-4 CRADLE BUSHING REPLACER G6, Lucerne, DTS
J-45725-A BUSHING REPLACER
J-45746
J-45756 REAR OUTPUT SHAFT SEAL INSTALLER 2003 Hummer H2, GMT610, GMT800 with Borg Warner Transfer Case
J-45758 Input Seal Installer 2003 GMT610 van
J-45785 Valve Spring Compressor
J-45782
J-45798 STEERING GEAR THRUST BEARING PROTECTOR 2001-Current 2500/3500 C/K Truck
J-45806 COOLER FLUSHER ADAPTER 5L40-e trans
J-45849 Input Shaft Support Bearing Remover 2003 +up GMT610 Van w/B/W 4473 t/case
J-45849-1 Input Shaft Support Bearing Remover 2003 +up GMT610 Van w/B/W 4473 t/case
J-45851 BALL JOINT SEPARATOR PROTECTOR ADAPTER 2003 +up GMT610 Van w/B/W 4473 t/case
J-45853 Wheel Bearing/Seal Installer 2003 +up GMT610 G/H Van
J-45857 VSES Wheel Bearing Remover 2003 + up C/K and 2005+ up S/T w/VSES
J-45857-1 VSES Wheel Bearing Remover 2003 + up C/K and 2005+ up S/T w/VSES
J-45860 VSES Tone Ring Installer 2003 + up C/K and 2005+ up S/T w/VSES
J-45861 ECT SENSOR SOCKET COLORADO/CANYON
J-45863 CALIPER PISTON SEAL INSTALLER COLORADO/CANYON
J-45866
J-45867
J-45868
J-45870 Inner Pinion Bearing Race Installer 2002 up C/K, S/T, G/H trucks/vans
J-45872 ACCUMULATOR PISTON COMPRESSOR 2003 GMT800 Pick-up w/Hydra-boost
J-45873-30 INJECTOR FLOW TEST ADAPTERS(4) 6.6 DURAMAX ENGINE
J-45900 Seal Installer ( J-24430 may also be Used)
J-45910 INJECTOR TUBE REMOVAL TOOL 6.6 DURAMAX ENGINE
J-45920 SEAT BRACKET RESIZER
J-45930-10 REAR MAIN OIL SEAL INSTALLER UPDATE The crankshaft bolts have changed on 2006-up Premium V8 engines
J-45934 Input Shaft Seal Installer Colorado / Canyon Drivetrain On-Vehicle Service Tools
J-45938 ALIGNMENT SOCKET COLORADO/CANYON
J-45949 Pilot Bushing Bearing Installer IN-LINE 4 & 5 ENGINE
J-45949-1 Pilot Bushing Bearing Installer IN-LINE 4 & 5 ENGINE
J-45951 Seal Installer  
J-46001 Diff. Drive Pinion Holding Tool
J-46002 Drive Pinion Lock Nut Wrench
J-46003 Output Shaft Bearing Locknut Wrench
J-46004 Drive Pinion Holding Tool
J-46007 Half Shaft Seal Installer
J-46009 Front Axle Shaft Remover
J-46010 Vibe tools Storage Case J-46104 Water Pump Pulley Holding Tool V6 HIGH FEATURE ENGINE
J-46143 Cooling System Pressure Test Adapters Hybird 
J-46165 Guide Pin Installers 4.3L Engine
J-46265 Lt. Int. Axle Stub Shaft Seal Installer Getrag 650 front axle - CTS
J-46277 Brake Rotor Remover Adapter
J-46363 Fuel Line Release Tool 2003 C/K Truck -E85 gas
J-46405 Axle Shaft Seal Installer CORVETTE & XLR J-46406-1 Fan Clutch Holder Used with
J-41240-2   All Truck 1998-up (C/K, S/T, M/L, G/P, MD)
J-46409 PULLER BOLT SET Allison 1000/2000/2400
J-46588 AXLE SEAL CRIMPER includes Corvette
J-46594 Injector Removal Tool Duramax
J-46607 Clutch Disc & Pump Rotor Aligner Equinox
J-46620 Seal Installer,  New 6T70 Transaxle - This three piece tool is used to install and compress the solid Teflon seals
J-46621 Piston Seal Protector New 6T70 Transaxle - 2-6 Piston Seal J-46622 Piston Seal Protector New 6T70 Transaxle - is a split ring that protects the 3-5-R seal from damage during installation
J-46623 Piston Seal Protector New 6T70 Transaxle - allows the 1-2-3-4 piston seal to slide smoothly over any retaining ring grooves 
J-46624 Seal Installer,  New 6T70 Transaxle - This three piece tool is used to install and compress the solid Teflon seals
J-46626 Seal Installer aligns and installs the manual shaft seal to the correct depth in the 6T70 transaxle without damage
J-46627 Transfer Drive Gear Support Seal Installer New 6T70
J-46627-A Installer ,Pump Cover Seal A running production change in the 6T70/75 requires the Pump Cover Seal be installed deeper into the transaxle
J-46628 Low / Reverse Piston Installer New 6T70
J-46629 Seal Installer 6T70
J-46629-A Axle Seal Installer change in the design of the 6T70 requires the axle seal be installed deeper into the transaxle
J-46630 Lube Dam Installer 6T70
J-46632 2-6 Piston Installer 6T70
J-46664 Pump Alignment Tool 6L50, 6L80 or 6L90 transmission
J-47275 80 Pin Breakout Box Adapter 2006 C/K Truck,  connects between the Transmission Control Module and vehicle harness
J-47623 Rear Main Seal Installer 3800 engine J-47747
J-47917
J-48021 Seal Installer Transfer Case Output shaft seal
J-48059 Tube Stand Used 2009 Chevrolet Traverse (Engine Support) 
J-48059 Tube Stand New 2009 Chevrolet Traverse (Engine Support)
J-48870

 

No comments:

Post a Comment